Tư vấn kỹ thuật0919 235 568
Hoàng Phúc Corp
Seehai

1GHz Two way amplifier (Big housing and four modules)

  • Aluminium die casting housing, plug-in shielded frame ,surface by powder coating, beautiful and firm, corrosion prevention.
  • Waterproof design, lightning proof circuits, rainproof connectors, fit for outdoor use.
  • Double power output with high electric level.
  • Forward path 1 * 1 GHz GaAs or GaN Push-Pull Hybrid Amp and 2 * 1 GHz GaAs or GaN Power-Doubler Hybrid Amp. Modules. Return path 1 * Reverse Hybrid Amp. Module. Module has brand name from G7/EU countries All modules have brand name from G7/EU countries
  • 20dB independent input and output test ports are set inside (outside optional) the product for the forward and return path. On board plug-in diplex filter, adjustable attenuators (or plug-in pads), and plug-in equalizers easy to choose or upgrad
  • Independent power supply installation with for 60VAC or 220VAC.
  • The housing with plug-in shielded frame ,easy to repair and upgrade.
  • Apply to trunk and branch line in two way CATV system, to compensate the attenuation of branch lines.
Mã sản phẩm
SFD-1G34S2K6G4

Tổng quan

Specification:

ITEMSFORWARD PATHRETURN PATH
Frequency Range82 ~ 1,000 MHz, or higher5 ~ 65 MHz
Operating Gain (Includes DPXs, EQs, AGC …)≥ 34 dB, full range≥ 17 dB, full range
Response Flatness≤ ± 0.75 dB
Gain Control Range0 ~ 20 dB,0 ~ 20 dB,
Slope Control Range (Fixed value, Plug-in modules)3 ~ 15 dB,3 ~ 9 dB,
Noise Figure≤ 9 dB≤ 9 dB
Return Loss (75-ohm Reference)≥ 12 dB, full range
Recommended Output Levels≥ 38.5 / 52 dBmV (82 / 1,000 MHz)≥ 42 / 42 dBmV (5 / 65 MHz)
Rated Signal Level Distortion (*)
Cross Modulation (XMOD)≤ - 60 dB≤ - 60 dB
Composite Second Order (CSO)≤ - 63 dB≤ - 63 dB
Composite Triple Beat (CTB)≤ - 63 dB≤ - 63 dB
Input / Output Impedances75 ohms, 5/8-24 Female
Hum Modulation≥ 65 dB @ 10A passing current
Power Requirements40 ~ 90 VAC / 50 ~ 60 Hz, or larger
Internal Circuit Voltage24 ± 0.3 VDC (high efficient switchmode power supply), withstand ≥1.8A Load overload, overvoltage, short circuit protection.
Housing DesignDie-cast aluminium housing design with paint/coating for: - Good heat spread (Operating Temp.: 0 ~ +60oC, or wider). - RF shielding ≥ 110 dB. - IP67 degree of dust and water protection. - For Strand and pedestal mounting.

NOTE:

- Measured with 132 NTSC (or 96 PAL) channels of Forward Path, at least 4 T-channels of Return Path, at Recommended Output Levels.

- Support Adj. Attenuator / plug-in Attenuator (PAD), plug-in DPX, and plug-in EQ between hybrid modules.

- Support Forward IN and OUT Test Ports (-20 dB), Return IN and OUT Test ports (-20 dB).

- Return Attenuator and EQ are designed / located at OUTPUT of Return Amp. Module.

- Lightning Arrestors at all IN/OUT Ports.

- RF Amp. Platform can be pluggable

Dữ liệu kỹ thuật

Các thông số bên dưới trích từ catalog sản phẩm.

Block Diagram:

SFD-1G34S2K6G4

Install Size: UNIT:mm

Sản phẩm liên quan

Danh mục →

Trao đổi về nhu cầu của bạn

Gửi yêu cầu để được hỗ trợ chọn thiết bị và phương án kết nối.

Liên hệ tư vấn