Tư vấn kỹ thuật0919 235 568
Hoàng Phúc Corp
Seehai

1310nm Optical Transmitter (SOT-03-1G-C-**dBm)

  • 1RU 19″rack mount housing, standalone.
  • Support 870/1003/1218Mhz band and the DOCSIS 3.1 standard.
  • AGC and MGC gain control modes are optional.
  • DFB coaxial or butterfly-typed laser is available.
  • Output optical power is from +6dBm to +15dBm optional.
  • Patent pre-distortion technology, good CNR, CSO, and CTB indicators are high.
  • Dual power supply hot backup, a variety of power feed options; AC100-240V and DC48V are optional.
  • LED status indication in the front panel.
  • Laser output power, bias current and cooling current are detected in real time.
Mã sản phẩm
SOT-03-1G-C-**dBm

Tổng quan

The S0T-03-1G-C-**dBm downstream optical transmitter supports 870/1003/1218Mhz band and the DOCSIS 3.1 standard. The output optical power is from +6 dBm to +15 dBm available. It can be used for optical fiber transmission of downstream analog TV signals, digital television signals and CMTS data signals in HFC network. It has patented pre-distortion circuit, high CNR and low distortion.

Dữ liệu kỹ thuật

Các thông số bên dưới trích từ catalog sản phẩm.

Schematic diagram

SOT-03-1G-C-dBm_1

Specifications

CharacteristicsUnitValue/Performance
Optical Parameters
Laser Type-DFB Laser Module (OC-48 pinout compatible), with Isolator, with CNR = 51 dB min., CSO = 60 dB min., CTB = 65 dB min., with brand name from G7/EU countries
Center Wavelengthnm1310 ± 10
Connector-SC/APC (sleeve material: ceramic, connector with shutter)
Output PowermW≥ 6.3 (8dBm) or ≥ 20 (13dBm)
RF Parameters
Input LeveldBmV/ch15 to 25, or larger
RF Amplifier Technology-1 * CATV GaAs or GaN Push-Pull and 1 * CATV GaAs or GaN Power-Doubler Hybrid Amp. Modules. All have brand name from G7/EU countries
Gain Control RangedB0 ~ 10, or larger
Input ImpedanceΩ75
Return LossdB≥ 16 dB
BandwidthMHz82 to 1000, or larger
FlatnessdB≤ ± 0.75
Channel Loading-77 NTSC / 60 PAL channels + 320 MHz digital channels
Link Performance
(Test at temperature 25 degree C, 77 NTSC channels / 60 PAL channels Loading)-
CNRdB≥ 52 @ link loss = 14dB ; ≥ 51 @ link loss = 15 dB
CSOdB≤ -63
CTBdB≤ -65
Others
Control Interface-RS232 / RS485 and RJ45. Support MIB table for SNMP Monitoring software
Power SupplyV100 to 240 VAC, 50/60 Hz, or larger
Operating Temperature°C0 to 50, or larger

Structure Description

SOT-03-1G-C-dBm_2_1

Front panel

1Power indicator
2Laser drive level indicator: Steady green light: Drive level is normal. Blinking red light: Drive level alarm. You can view the alarm in the Alarm Status, the second level submenu.
3Laser working status indicator: Steady green light: The laser is operating normally. Steady red light: The laser is not turned on. Blinking red light: The device has a parameter alarm. You can view the alarm in the Alarm Status, the second level submenu.
4Device running indicator: This indicator will flash by 1Hz frequency after the device start running normally.
5Laser switch: ON: The laser is on. OFF: The laser is off. Keep the laser off before the device is powered on, and turn on the laser after the self-inspection is completed when power on.
6Laser drive level test port: -20dB
SOT-03-1G-C-dBm_3

Rear panel

1Fan6RS232 interface
2Ground stud, ensure good grounding before power on7LAN interface
3RF input 18Power module 1, hot swappable
4RF input 1 test port -20dB9Power module 2, hot swappable
5Optical signal output

Dimension

SOT-03-1G-C-dBm_4

Sản phẩm liên quan

Danh mục →

Trao đổi về nhu cầu của bạn

Gửi yêu cầu để được hỗ trợ chọn thiết bị và phương án kết nối.

Liên hệ tư vấn