Tư vấn kỹ thuật0919 235 568
Hoàng Phúc Corp
Seehai

1550nm Directly Modulated Optical Transmitter

According to the Next Generation Broadcasting (NGB) planning and PON standards, 1550nm is defined as the transmission wavelength for HFC downstream. The high cost of 1550nm external modulated transmitter and dispersion effects of 1550nm directly modulated make network transformation difficult. Thus we create the 1550nm directly modulated optical transmitter with electronically controlled dispersion compensation. It supports up to 1.2GHz band and DOCSIS 3.1 system. With two RF inputs and high isolation, it enables the signal transmission of QAM and IPQAM smoothly. Support a transmission distance of 50KM with electronically controlled dispersion compensation. Built-in CWDM is optional for multi-wavelength networking.

Mã sản phẩm
SOT-03-1550B-CH**/DWDM

Tổng quan

870/1003/1218Mhz band, support DOCSIS 3.1 system.

The AGC and MGC gain control modes are optional.

Dual power supply; hot backup; a variety of power supply options are available, optional AC220V and DC48V.

Laser output power, bias current and cooling current are detected in real time.

Optional CWDM for optical signal insertion.

Electronically controlled dispersion compensation can support a transmission distance of 50KM.

Low-cost solution is comparable to the performance of external modulated transmitter.

ITU standard wavelength is optional.

Dữ liệu kỹ thuật

Các thông số bên dưới trích từ catalog sản phẩm.

Schematic diagram

Diagram of 1550nm_Directly_Modulated_Optical_Transmitter.png

Note: The optical attenuator in the red dashed box and the wavelength division multiplexer in the blue dashed box are optional.

Specifications

ItemUnitParameter
Optical Part
Optical wavelengthnmITU wavelength
Laser typeButterfly-typed DFB laser
Optical modulation modeDirect optical intensity modulation
Optical connector typeFC/APC or SC/APC
Output optical powermW10The insertion loss of the VOA and CWDM is excluded.
External optical signal inputdBm-5~10
RF Part
Frequency rangeMHz47~870/1003/1218
RF input leveldBuV77± 5
Flatness in banddB± 0.75
Input return lossdB≥ 16
RF AGC control rangedB±5
RF MGC adjustable rangedB0~20
RF input isolationdB≥ 50Isolation between two RF inputs
RF input test portdB-20±1
Laser drive level test portdB-20±1
Electronically controlled optical attenuator tolerancedB≤1: ATT 0-15dB
≤3: ATT 16-20dB
CNRdB≥ 48550MHZ 59CH analog signal 77dBuV/CH
C/CSOdB≥ 58550-870MHZ 40CH digital signal 67dBuV/CH
C/CTBdB≥ 6325 Km, -1dBm input
CNRdB≥ 46550MHZ 59CH analog signal 77dBuV/CH
C/CSOdB≥ 55550-870MHZ 40CH digital signal 67dBuV/CH
C/CTBdB≥ 6350Km, -1dBm input
MERdB≥ 4025 Km, -1dBm input, 96CH digital 77dBuV/CH
≥ 3950 Km, -1dBm input, 96CH digital 77dBuV/CH
Others
Maximum power consumptionW≤10
Operating temperature℃-5 ~ + 55
Storage temperature℃-30 ~ + 70
WeightKg5.5

Structure Description

Structure Description of 1550nm Directly Modulated Optical Transmitter

Front panel

1Power indicator
2Device running indicator: This indicator will flash by 1Hz frequency after the device start running normally.
3Laser working status indicator: Steady green light: The laser is operating normally. Steady red light: The laser is not turned on. Blinking red light: The device has a parameter alarm. You can view the alarm in the Alarm Status, the second level submenu.
4Laser drive level indicator: Steady green light: Drive level is normal. Blinking red light: Drive level alarm. You can view the alarm in the Alarm Status, the second level submenu.
5160×32 dot-matrix LCD screen: used to display all the parameters of the machine.
6Display the exit or cancel key of the setup menu.
7Display the up or increase key of the setup menu.
8Display the down or decrease key of the setup menu.
9Display the enter key of the setup menu.
10Laser switch: ON: The laser is on. OFF: The laser is off. Keep the laser off before the device is powered on, and turn on the laser after the self-inspection is completed when power on.
11Laser drive level test port: -20dB

1550nm_Directly_Modulated_Optical_Transmitter_4.png

Rear panel

1Fan7Optical signal output
2Ground stud, ensure good grounding before power on8Optical signal input: without WDM, no this port
3RF input 19RS232 interface
4RF input 210LAN interface
5RF input 1 test port -20dB11Power module 1, hot swappable

Sản phẩm liên quan

Danh mục →

Trao đổi về nhu cầu của bạn

Gửi yêu cầu để được hỗ trợ chọn thiết bị và phương án kết nối.

Liên hệ tư vấn