Tư vấn kỹ thuật0919 235 568
Hoàng Phúc Corp
Seehai

4-port Outdoor Optical Node (SGJ-CS-1G-P1-OR1-OTHD1 )

  • 4 high output individual paths.
  • Bandwidth: forward path 82-870/1000MHz;reverse path 5-65MHz.
  • Use Mitsubishi laser and detector:
  • Use high quality RF Amplifier module, low power consumption and low temperature.
  • Can be installed 2 optical receiver module, and auto-switch.
Mã sản phẩm
SGJ-CS-1G-P1-OR1-OTHD1

Tổng quan

Can be installed 2 DFB1310/1470/1490/1510/1530/1550/1570/1590/1610nm reverse optical transmitter module.

Can be inserted status monitoring transponder, remote control the switching of forward receiver path and on-off of reserve return path.

The network management is HMS standard, meet with SNMP communication protocol, can support the third-party standards management software and compatible with many other famous network management systems.

FWD mixed-signal input port, reverse mixed-signal output port.

Can receive low optical power, optical Input Power (standard configuration):-6dBm to +2dBm.

Soft start, the high quality power supply has over-voltage, over-current and short-circuit protection, optional hot backup. Aluminum-Alloy housing, Anti-oxidation design.

15Apower passing.

Lightning Arrestors at all RF In/Out Ports.

RF Amplifier Platform, Forward Receiver and Return Transmitter Modules: On field Pluggable.

Dữ liệu kỹ thuật

Các thông số bên dưới trích từ catalog sản phẩm.

Block Diagram

SGJ-CS-1G-P1-OR1-OTHD1_04

Specification

CharacteristicsUnitValue/Performance
FORWARD PATH
RF Parameters
Operating BandwidthMHz82 - 1000 or higher
FlatnessdB≤ ± 0.75
Output Level @ 1,000 MHzdBmV≥ 52 @ 15 dB slope (optical Input: -1 ~ +2 dBm)
RF Amplifier Technology-1 * CATV GaAs or GaN Push Pull Hybrid Amp. Module and 4 * CATV GaAs or GaN Power Doubling Hybrid Amp. Modules, brand names from G7/EU countries
RF Return LossdB≥ 16
RF ImpedanceΩ75
Test pointdB-20 ± 1
Output Port-5/8-24 Female
Gain Control RangedB0 ~ 20,
SlopedB0 ~ 16.5
Optical Parameter (must support at least 2 receiver modules, 1 as main and 1 as redundant, on field pluggable, with RF auto switch)
Receiver Type-InGaAs PIN Photodiode + CATV GaAs or GaN Push Pull Hybrid Amp. Module, brand from G7/EU countries; or Optical Receiver Hybrid Module + MMIC, brand from G7/EU countries.
Optical Wavelengthnm1290 ~ 1600
Optical Return LossdB≥ 45
Input PowerdBm-4 to + 2, or larger
Connector-SC/APC (ferrule material: ceramic)
Link Performance
10 Km fiber cable, Input Level: 20 dBmV / Analog channel (77 NTSC / 60 PAL analog channels) + upto 450 MHz digital channels-C/N ≥ 52 dB (@ 0 dBm optical input)
C/N ≥ 51 dB (@ -1 dBm optical input)
C/N ≥ 50 dB (@ -2 dBm optical input)
CSO ≥ 63 dB, CTB ≥ 63 dB
RETURN PATH (must support 2 modules for ONU segmentation purpose, on field pluggable)
RF BandwidthMHz5 – 65,
RF Amplifier Technology-Reverse Hybrid Amp. Module, brand from G7/EU countries
RF Return LossdB≥ 16
Optical Wavelengthnm1310±10 or 1550±10, specify when ordering
Laser Type-Uncooled DFB Laser with isolator, brand from G7/EU countries
Optical Return LossdB≥ 45
RF FlatnessdB≤ ± 0.75
RF Input LeveldBmV15 to 25, or larger
Optical Connector-SC/APC (ferrule material: ceramic)
Optical Output PowermW0.5, 1.6 or 2, specify when ordering
Return Link Performance (15 dBmV full range or 2 video channels with 25 dBmV/ch)
NPRdB≥ 44
Dynamic scopedB≥ 24
Others
Operational Temp.°C0 to +60, or larger
Storage Temp.°C0 to + 70, or larger
Power SupplyV40 to 90 VAC, 50/60 Hz, or larger
Current passing (withstand)A≥ 10
* Lightning Arrestors at all RF In/Out ports. * RF Amplifier Platform, Forward Receiver and Return Transmitter Modules: On field Pluggable.

Install Size (unit: mm)

SGJ-CS-1G-P1-OR1-OTHD1_05

Buyer’s Guide

SGJ-CS-1G-P1-OR1-OTHD1_06

Sản phẩm liên quan

Danh mục →

Trao đổi về nhu cầu của bạn

Gửi yêu cầu để được hỗ trợ chọn thiết bị và phương án kết nối.

Liên hệ tư vấn