High-Pass Filter
SHPF-6585-FAll-in-one brass structure with nickel-plated surfa Small size fit for indoor use. Can be installed separately, or as…

Can be installed 2 DFB1310/1470/1490/1510/1530/1550/1570/1590/1610nm reverse optical transmitter module.
Can be inserted status monitoring transponder, remote control the switching of forward receiver path and on-off of reserve return path.
The network management is HMS standard, meet with SNMP communication protocol, can support the third-party standards management software and compatible with many other famous network management systems.
FWD mixed-signal input port, reverse mixed-signal output port.
Can receive low optical power, optical Input Power (standard configuration):-6dBm to +2dBm.
Soft start, the high quality power supply has over-voltage, over-current and short-circuit protection, optional hot backup. Aluminum-Alloy housing, Anti-oxidation design.
15Apower passing.
Lightning Arrestors at all RF In/Out Ports.
RF Amplifier Platform, Forward Receiver and Return Transmitter Modules: On field Pluggable.
The specifications below are taken from the product catalog.
Block Diagram

Specification
| Characteristics | Unit | Value/Performance |
| FORWARD PATH | ||
| RF Parameters | ||
| Operating Bandwidth | MHz | 82 - 1000 or higher |
| Flatness | dB | ≤ ± 0.75 |
| Output Level @ 1,000 MHz | dBmV | ≥ 52 @ 15 dB slope (optical Input: -1 ~ +2 dBm) |
| RF Amplifier Technology | - | 1 * CATV GaAs or GaN Push Pull Hybrid Amp. Module and 4 * CATV GaAs or GaN Power Doubling Hybrid Amp. Modules, brand names from G7/EU countries |
| RF Return Loss | dB | ≥ 16 |
| RF Impedance | Ω | 75 |
| Test point | dB | -20 ± 1 |
| Output Port | - | 5/8-24 Female |
| Gain Control Range | dB | 0 ~ 20, |
| Slope | dB | 0 ~ 16.5 |
| Optical Parameter (must support at least 2 receiver modules, 1 as main and 1 as redundant, on field pluggable, with RF auto switch) | ||
| Receiver Type | - | InGaAs PIN Photodiode + CATV GaAs or GaN Push Pull Hybrid Amp. Module, brand from G7/EU countries; or Optical Receiver Hybrid Module + MMIC, brand from G7/EU countries. |
| Optical Wavelength | nm | 1290 ~ 1600 |
| Optical Return Loss | dB | ≥ 45 |
| Input Power | dBm | -4 to + 2, or larger |
| Connector | - | SC/APC (ferrule material: ceramic) |
| Link Performance | ||
| 10 Km fiber cable, Input Level: 20 dBmV / Analog channel (77 NTSC / 60 PAL analog channels) + upto 450 MHz digital channels | - | C/N ≥ 52 dB (@ 0 dBm optical input) |
| C/N ≥ 51 dB (@ -1 dBm optical input) | ||
| C/N ≥ 50 dB (@ -2 dBm optical input) | ||
| CSO ≥ 63 dB, CTB ≥ 63 dB | ||
| RETURN PATH (must support 2 modules for ONU segmentation purpose, on field pluggable) | ||
| RF Bandwidth | MHz | 5 – 65, |
| RF Amplifier Technology | - | Reverse Hybrid Amp. Module, brand from G7/EU countries |
| RF Return Loss | dB | ≥ 16 |
| Optical Wavelength | nm | 1310±10 or 1550±10, specify when ordering |
| Laser Type | - | Uncooled DFB Laser with isolator, brand from G7/EU countries |
| Optical Return Loss | dB | ≥ 45 |
| RF Flatness | dB | ≤ ± 0.75 |
| RF Input Level | dBmV | 15 to 25, or larger |
| Optical Connector | - | SC/APC (ferrule material: ceramic) |
| Optical Output Power | mW | 0.5, 1.6 or 2, specify when ordering |
| Return Link Performance (15 dBmV full range or 2 video channels with 25 dBmV/ch) | ||
| NPR | dB | ≥ 44 |
| Dynamic scope | dB | ≥ 24 |
| Others | ||
| Operational Temp. | °C | 0 to +60, or larger |
| Storage Temp. | °C | 0 to + 70, or larger |
| Power Supply | V | 40 to 90 VAC, 50/60 Hz, or larger |
| Current passing (withstand) | A | ≥ 10 |
| * Lightning Arrestors at all RF In/Out ports. * RF Amplifier Platform, Forward Receiver and Return Transmitter Modules: On field Pluggable. |
Install Size (unit: mm)

Buyer’s Guide

Send a request to get help choosing equipment and a connection plan.