High-Pass Filter
SHPF-6585-FAll-in-one brass structure with nickel-plated surfa Small size fit for indoor use. Can be installed separately, or as…

This product is FTTH (Fiber to the Home) optical receiver, with low power optical receiving, which can satisfy the demand of FTTH CATV receiving. It can separately and effectively receive 1550nm wavelength of CATV signal, with optical isolator, to satisfy the demand of only allowing 1550 wavelength received, and filtering out other wavelength optical signals.
The product is compact, easy installation, and an ideal product for FTTH CATV network.
Các thông số bên dưới trích từ catalog sản phẩm.
Technical Specification
| Optical Parameters | |
| Receiver Type | Photodiode with brand name from G7/EU or Korea countries |
| Amplifier Type | MMIC with brand name from G7/EU or Korea countries |
| Input Wavelength (nm) | 1260 ~ 1600 |
| Operating Wavelength (nm) | 1550 ± 20 |
| Input optical Power (dBm) | -10 ~ -2, or larger range |
| Optical return loss (dB) | ≥ 45 |
| Fiber connector | SC/APC |
| RF Parameters | |
| Bandwidth (MHz) | 82-862, or larger range |
| Output level (dBmV) | ≥ 20 per channel, with optical input: -7 ~ -2 dBm |
| Flatness (dB) | ≤ ± 0.75 |
| Return loss (dB) | ≥ 14 |
| Impedance | 75 Ω |
| RF output connector | At least 1 output port, F female type |
| Link performance | |
| 77 NTSC / 59 PAL analog channels | CNR ≥ 50 dB (0 dBm optical input) or CNR ≥ 49 dB (-1 dBm optical input) or CNR ≥ 48 dB (-2 dBm optical input) |
| CSO ≥ 60 dB, CTB ≥ 60 dB | |
| Others | |
| Power supply requirements | - Using the external AC/DC adapter, switching mode power supply, with AC input: 100-240 VAC, 50/60Hz, or larger Electrolytic capacitor for output with withstand voltage must be at least 2 times of output voltage DC output power: be at least 1.5 times of actual power consumption of respective end device Output ripple: ≤ ±1.5% International standard of efficiency, level V |
| Operational Temp. (oC) | 0 ~ 40, or larger |
Block Drawing

Install Dimension
(Unit: mm)

Gửi yêu cầu để được hỗ trợ chọn thiết bị và phương án kết nối.