Technical support0919 235 568
Hoàng Phúc Corp
Seehai

FTTH Optical Receiver without WDM (FTTH-SOR01AX-1550)

  • Advanced aluminum house with surface treated by stoving varnish good heat dissipation and anti-corrosion.
  • RF full-GaAs amplifier circuit with low noise. Minimum reception at -18dBm digital signal, and minimum reception at -9dBm analog signals.
  • Low power consumption, high-efficiency switch power, can make sure the high reliability and
  • stability of power supply. Power consumption is less than 4W. Also it adopts optical detecting circuit.
  • Multi-stage anti-thunder devices (TVS transient suppression diode), strict anti-thunder system
  • to ensure the safe operation of the equipment
  • Adjustable output gain(0 ~ 18 db), output level ≥20dBm.
  • SC/APC or FC/APC optical connector, metric or British RF interface.
  • It can realize the power supply of 12V or 5V DC input port feeding.
  • Single or double output is optional.
  • Remark: Two-stage amplification MMIC and Photodiode, both with brand name from EU/G7 and Korea countries.
Product code
FTTH-SOR01AX-1550

Overview

This product is FTTH (Fiber to the Home) optical receiver, with low power optical receiving, which can satisfy the demand of FTTH CATV receiving. It can separately and effectively receive 1550nm wavelength of CATV signal, with optical isolator, to satisfy the demand of only allowing 1550 wavelength received, and filtering out other wavelength optical signals.

The product is compact, easy installation, and an ideal product for FTTH CATV network.

Technical data

The specifications below are taken from the product catalog.

Technical Specification

Optical Parameters
Receiver TypePhotodiode with brand name from G7/EU or Korea countries
Amplifier TypeMMIC with brand name from G7/EU or Korea countries
Input Wavelength (nm)1260 ~ 1600
Operating Wavelength (nm)1550 ± 20
Input optical Power (dBm)-10 ~ -2, or larger range
Optical return loss (dB)≥ 45
Fiber connectorSC/APC
RF Parameters
Bandwidth (MHz)82-862, or larger range
Output level (dBmV)≥ 20 per channel, with optical input: -7 ~ -2 dBm
Flatness (dB)≤ ± 0.75
Return loss (dB)≥ 14
Impedance75 Ω
RF output connectorAt least 1 output port, F female type
Link performance
77 NTSC / 59 PAL analog channelsCNR ≥ 50 dB (0 dBm optical input) or CNR ≥ 49 dB (-1 dBm optical input) or CNR ≥ 48 dB (-2 dBm optical input)
CSO ≥ 60 dB, CTB ≥ 60 dB
Others
Power supply requirements- Using the external AC/DC adapter, switching mode power supply, with AC input: 100-240 VAC, 50/60Hz, or larger Electrolytic capacitor for output with withstand voltage must be at least 2 times of output voltage DC output power: be at least 1.5 times of actual power consumption of respective end device Output ripple: ≤ ±1.5% International standard of efficiency, level V
Operational Temp. (oC)0 ~ 40, or larger

Block Drawing

FTTH-SOR01AX-1550_EN_04

Install Dimension

(Unit: mm)

FTTH-SOR01AX-1550_EN_05

Related products

Categories →

Tell us what you need

Send a request to get help choosing equipment and a connection plan.

Contact us