High-Pass Filter
SHPF-6585-FAll-in-one brass structure with nickel-plated surfa Small size fit for indoor use. Can be installed separately, or as…

Excellent photovoltaic conversion device, stable and reliable performance.
Good specification, meet newest requirements of two-way broadband networks.
10 Ampere Power Passing.
Lighting arrester for each input and output interfaces.
Aluminum die casting housing, plug-in shielded frame, surface by powder coating, elegant and firm appearance, corrosion prevention.
The specifications below are taken from the product catalog.
Specification
| Characteristics | Unit | Value/Performance |
| FORWARD PATH | ||
| RF Parameters | ||
| Operating Bandwidth | MHz | 82 – 870, or higher |
| Flatness | dB | ≤ ± 0.75 |
| Output Level @ 870 MHz | dBmV | ≥ 50 @ 13.5 dB slope |
| RF Amplifier Technology | - | 2 * CATV GaAs or GaN Power-Doubling Hybrid Amp. Modules with brand name from G7/EU countries |
| RF Return Loss | dB | ≥ 16 |
| RF Impedance | Ω | 75 |
| Test point | dB | -20 ± 1 |
| Output Port | - | 5/8-24 Female |
| Gain Control Range | dB | 0 ~ 20, |
| Slope | dB | 0 ~ 15 |
| Optical Parameters (support 2 receiver modules, 1 as main and 1 as redundant, on field pluggable, with RF auto switch) | ||
| Receiver Type | - | InGaAs PIN Photodiode (brand name from G7/EU countries) + CATV GaAs or GaN Push-Pull Hybrid Amp. Module (brand name from G7/EU countries); or Optical Receiver Hybrid Module + MMIC (brand name from G7/EU countries) |
| Optical Wavelength | nm | 1290 ~ 1600, or larger |
| Optical Return Loss | dB | ≥ 45 |
| Input Power | dBm | -4 to + 2, or larger |
| Connector | - | SC/APC (ferrule material: ceramic) |
| Link Performance | ||
| 10 Km fiber cable, Input Level: 20 dBmV/analog channel (77 NTSC / 60 PAL analog channel) + 320 MHz digital channels | - | C/N ≥ 52 dB (@ 0 dBm optical input) |
| C/N ≥ 51 dB (@ -1 dBm optical input) | ||
| C/N ≥ 50 dB (@ -2 dBm optical input) | ||
| CSO ≥ 63 dB, CTB ≥ 63 dB | ||
| RETURN PATH (can support 2 transmitter modules for ONU segmentation purpose, on field pluggable) | ||
| RF Amplifier Technology | - | 1 * CATV Return path Hybrid Amplifier Module (brand name from G7/EU countries), per Optical TX Module |
| RF Bandwidth | MHz | 5 – 65 |
| RF Return Loss | dB | ≥ 16 |
| Optical wavelength | nm | 1310±10 or 1550±10, specify when ordering |
| Laser Type | - | Uncooled DFB Laser with isolator, brand name from G7/EU countries |
| Optical Return Loss | dB | ≥ 45 |
| RF Flatness | dB | ≤ ± 0.75 |
| Connector | - | SC/APC (ferrule material: ceramic) |
| Input Level | dBmV | 15 to 25, or larger |
| Output Power | mW | 0.5, 1.6 or 2, specify when ordering |
| Return Link Performance (15 dBmV full range or 2 video channels, 25 dBmV/ch) | ||
| NPR | dB | ≥ 44 |
| Dynamic Scope | dB | ≥ 24 |
| Others | ||
| Operational Temp. | °C | 0 to +60 or larger |
| Storage Temp. | °C | 0 to +70 or larger |
| Power Supply | V | 40 to 90 VAC , 50/60 Hz, or larger |
| Current Passing (withstand) | A | ≥ 10 |
| * Each RF In/Out port can be divided into 2 separated In/Out ports with additional plug-in Splitters and Diplex Filters. * Lightning Arrestors at all RF In/Out ports. * RF Amp. Platform, Forward Receiver and Return Transmitter Modules: On field Pluggable. |
Install size: Unit: mm

Send a request to get help choosing equipment and a connection plan.