High-Pass Filter
SHPF-6585-FAll-in-one brass structure with nickel-plated surfa Small size fit for indoor use. Can be installed separately, or as…

The SORD series optical terminal is a home-use optical receiver for FTTH (Fiber to the Home) network optical fiber access terminals to enable analog or digital signals to enter the home. The machine uses low-power photodetectors, GaAs and optical AGC technology to meet the fiber-to-the-home CATV reception needs.
High quality shell, through hole design on both sides, good heat dissipation;
RF channel full GaAs low noise amplifier circuit. The digital signal satisfies -18dBm reception and the analog signal satisfies -10dBm reception;
With optical input AGC control function (AGC range can be customized);
Anti-high frequency surge protection GaAs amplifier tube;
Low-power design, high-efficiency switching power supply ensures high reliability and high stability of the power supply. The overall power consumption is only 2W, with optical detection circuit;
SC/APC & SC/PC&FC/APC&FC/PC optical connectors, custom male or fe-male RF connector;
Multi-stage lightning protection device (TVS transient suppression diode), lightning protection system is tight, ensuring the safe operation of the equipment;
The specifications below are taken from the product catalog.
Specification:
| Item | Unit | Specification | |
| Receiver Type | - | Photodiode with brand name from Japan, G7/EU countries | |
| Amplifier Type | - | MMIC with brand name from British, G7/EU countries | |
| CATV Wavelength | nm | 1550±10 | |
| Optical Input Power | dBm | -18~+2 | |
| Optical AGC Range | dBm | 0~-9 | |
| CATV Optical input port | - | SC/APC | |
| RF connector | - | F-Female | |
| Output port | - | 1&2(customized) | |
| Frequency | MHz | 47~1000 | |
| Flatness | dB | ≤±1.25 | |
| RF Output Level (in AGC range) | dBμV | ≥80 | |
| Output RF resistance | Ω | 75 | |
| Output Return Loss | dB | ≤-14 | |
| C/N | dB | ≥43 | -9dBm Optical input power, 60 PAL channels |
| C/CSO | dB | ≥55 | |
| C/CTB | dB | ≥55 | |
| MER | dB | ≥31 | -15dBm optical input power |
| Power Supply Voltage | AC\V | 100~240 (Input of adaptor) | |
| Input Voltage | DC\V | +5(Input of product, output of adaptor) | |
| Power Dissipation | W | ≤2 | |
| Operating Temperature | ℃ | -10~+50 | |
| Dimension | mm | 96×50×24 (L×W×H) |
Block Diagram:

FTTH_Optical_Receiver
Structure:

FTTH_Optical_Receiver
Send a request to get help choosing equipment and a connection plan.