Technical support0919 235 568
Hoàng Phúc Corp
Seehai

FTTH Optical Receiver (FTTH-SOR01P-1550)

  • Optical receiving range: -18dBm~+2dBm;
  • AGC control to keep constant output level in different optical input power
  • RF output level: ≥80 dBμV @-10dBm optical input power;
  • The plastic housing with durable structure and good appearance, it is suitable for household and adopts special heat dissipation design. The detector uses metal shielding cover, it is safe and reliable.
  • LED indicator for showing the status of power supply and optical signal.
  • Remark: Two-stage amplification MMIC and Photodiode, both with brand name from G7/EU countries.
Product code
FTTH-SOR01P-1550

Overview

This product is FTTH (Fiber to the Home) optical receiver, with low power optical receiving, which can satisfy the demand of FTTH CATV receiving. It can separately and effectively receive 1550nm wavelength of CATV signal, with optical isolator, to satisfy the demand of only allowing 1550 wavelength received, and filtering out other wavelength optical signals.

The product is with compact structure, it is easy to install, and this is an ideal product for FTTH CATV network.

Technical data

The specifications below are taken from the product catalog.

Specification

ItemUnitSpecification
CATV Wavelengthnm1550±10
Optical Input PowerdBm-18~+2
Optical AGC RangedBm-11~+2
CATV Optical input portSC/APC
RF connectorF-Female
FrequencyMHz47~1000
FlatnessdB≤±1.25
RF Output Level (in AGC range)dBμV≥80
Output RF resistanceΩ75
Output Return LossdB≤-12
C/NdB≥43-9dBm Optical input power, 60 PAL channels
C/CSOdB≥55
C/CTBdB≥55
MERdB≥31-15dBm optical input power
Power Supply VoltageAC\V100~240 (Input of adaptor)
Input VoltageDC\V+5V/12V(Input of product, output of adaptor)
Power DissipationW≤2
Operating Temperature℃-10~+50
Dimensionmm95×60×23 (L×W×H)

Block Diagram

FTTH-SOR01P-1550_04

Interface introduction

FTTH-SOR01P-1550_05

1. LED indicator for power supply. If power supply works normally, the LED indicator will be green; if fails or power off, the indicator will be off.

2. LED indicator for optical receiving power. When optical receiving power is higher than -12dBm, the LED indicator will be green. When optical receiving power is lower than -12dBm, the LED indicator will be red.

3. CATV optical input port: SC/APC.

4. RF output port. Use coaxial cable to connect with the RF input port of TV or STB.

5. Power input port. Connect with the attached power adaptor.

Related products

Categories →

Tell us what you need

Send a request to get help choosing equipment and a connection plan.

Contact us