Technical support0919 235 568
Hoàng Phúc Corp
Seehai

FTTH Optical Receiver with WDM

This product is FTTH (Fiber to the Home) optical receiver, with low power optical receiving and optical control AGC technique, which can satisfy the demand of FTTH, and also can match with ONU or EOC for realizing the integration of three networks. With WDM, 1550nm CATV to be photoelectric converted for RF output, 1490/1310 nm PON signals directly pass, can transfer CATV+EPON by only one pc FTTH.

The product is compact, easy installation, and an ideal product for FTTH CATV network.

Product code
FTTH-SOR01AX-WDM

Overview

Performance Characteristic:

Advanced aluminum house with surface treated by stoving varnish good heat dissipation and anti-corrosion.

RF full-GaAs amplifier circuit with low noise. Minimum reception at -18dBm digital signal, and minimum reception at -9dBm analog signals.

AGC control range -2~ -12 dBm, while output keeps almost unchanged.

(AGC range is customized).

Low power consumption, high-efficiency switch power, can make sure the high reliability and stability of power supply. Power consumption is less than 4W. Also it adopts optical detecting circuit.

Multi-stage anti-thunder devices (TVS transient suppression diode), strict anti-thunder system to ensure the safe operation of the equipment.

With WDM built-in, it can realize the integration of three networks by one fiber. (1490/1310/1550nm)

SC/APC or FC/APC optical connector, metric or British RF interface.

It can realize the power supply of 12V DC or 5V DC input port feeding.

Single or double output is optional.

Remark: Two-stage amplification MMIC and Photodiode, both with brand name from G7/EU countries.

Technical data

The specifications below are taken from the product catalog.

Block Drawing:

FTTH_Optical_Receiver_with_WDM

Technical Specification:

ItemUnitSpecification
CATV Wavelengthnm1550±10
PON Wavelengthnm1310/1490
Optical Input PowerdBm-18~+2
Optical AGC RangedBm-12~-2
CATV Optical input portSC/APC
PON Optical reflect portSC/APC
RF connectorF-Female
FrequencyMHz47~1000
FlatnessdB≤±1.25
RF Output Level (in AGC range)dBμV≥80
Output RF resistanceΩ75
Output Return LossdB≤-12
C/NdB≥43-9dBm Optical input power, 60 PAL channels
C/CSOdB≥55
C/CTBdB≥55
MERdB≥31-15dBm optical input power
Power Supply VoltageAC\V100~240 (Input of adaptor)
Input VoltageDC\V+12 or +5V(Input of product, output of adaptor)
Power DissipationW≤4
Operating Temperature℃-10~+50
Dimensionmm88×50×23 (L×W×H)

Install Dimension (Unit: mm)

FTTH_Optical_Receiver_with_WDM

Related products

Categories →

Tell us what you need

Send a request to get help choosing equipment and a connection plan.

Contact us