Technical support0919 235 568
Hoàng Phúc Corp
Seehai

FTTH Optical Receiver WITH WDM (FTTH-SOR01A-WDM)

  • Advanced aluminum alloy house with good heat dissipation.
  • RF full-GaAs amplifier circuit with low noise. Minimum reception at -18dBm digital signal, and minimum reception at -9dBm analog signals.
  • AGC control range -2~ -12 dBm, while output keeps almost unchanged. (AGC range is customized).
  • Low power consumption, high-efficiency switch power, can make sure the high reliability and stability of power supply. Power consumption is less than 4W. Also it adopts optical detecting circuit.
  • Multi-stage anti-thunder devices (TVS transient suppression diode), strict anti-thunder system to ensure the safe operation of the equipment.
  • With WDM built-in, it can realize the integration of three networks by one fiber. (1490/1310/1550nm)
  • SC/APC or FC/APC optical connector, metric or British RF interface.
  • It can realize the power supply of 5V/12V DC input port feeding.
  • Single or double output is optional.
Product code
FTTH-SOR01A-WDM

Overview

This product is FTTH (Fiber to the Home) optical receiver, with low power optical receiving and optical control AGC technique, which can satisfy the demand of FTTH, and also can match with ONU or EOC for realizing the integration of three networks. With WDM, 1550nm CATV to be photoelectric converted for RF output, 1490/1310 nm PON signals directly pass, can transfer CATV+EPON by only one pc FTTH.

The product is compact, easy installation, and an ideal product for FTTH CATV network.

Technical data

The specifications below are taken from the product catalog.

Block Drawing

FTTH-SOR01A-WDM_05

Technical Specification

Optical Parameters
Receiver TypePhotodiode with brand name from G7/EU countries
Amplifier TypeMMIC with brand name from G7/EU countries
Input Wavelength (nm)1310, 1490, 1550
CATV Wavelength (nm)1550 ± 10
Output Wavelength (nm)1310, 1490
Channel Isolation (dB)≥ 40 (between 1310/1490nm and 1550nm)
Input optical Power (dBm) (1550nm)-10 ~ -2, or larger range
Optical return loss (dB)≥ 45
Fiber connectorSC/APC @1550nm is applied for both IN and OUT
RF Parameters
Bandwidth (MHz)82-862, or larger range
Output level (dBmV)≥ 20 per channel, with optical input: -7 ~ -2 dBm
Flatness (dB)≤ ± 0.75
Return loss (dB)≥ 14
Impedance75 Ω
RF output connectorAt least 1 output port, F female type
Link performance
77 NTSC / 59 PAL analog channelsCNR ≥ 50 dB (0 dBm optical input) or CNR ≥ 49 dB (-1 dBm optical input) or CNR ≥ 48 dB (-2 dBm optical input)
CSO ≥ 60 dB, CTB ≥ 60 dB
Others
Power supply requirements- Using the external AC/DC adapter, switching mode power supply, with AC input: 100-240 VAC, 50/60Hz, or larger Electrolytic capacitor for output with withstand voltage must be at least 2 times of output voltage DC output power: be at least 1.5 times of actual power consumption of respective end device Output ripple: ≤ ±1.5% International standard of efficiency, level V
Operational Temp. (oC)0 ~ 40, or larger

Install Dimension (Unit: mm)

FTTH-SOR01A-WDM_06

Related products

Categories →

Tell us what you need

Send a request to get help choosing equipment and a connection plan.

Contact us