Technical support0919 235 568
Hoàng Phúc Corp
Seehai

Indoor Amplifier

  • Aluminumplate housing, fashion color oxidation treatment, antioxidation and fastness.
  • Good looking suit to home use.
  • Aluminum cover board, with fine ink silk-screen printed, bright color.
  • Small size and light body,easy to install.
  • Externally setting independent test port(-30dB) for forward transmission.
Product code
SFD-8630S

Overview

Specification:

ITEMSFORWARDRETURN
Amplifier TechnologyTwo-stage amplification with at least one output stage of 1 * 870 MHz GaAs (or GaN) Push-Pull Hybrid Amp. Module (brand name G7/EU countries)2-STAGE RF TRANSISTOR/MMIC (brand name G7/EU countries)
Frequency Range82 ~ 870 MHz, or higher5 ~ 65 MHz
Operating Gain≥ 28 dB≥ 16 dB
Response Flatness≤ ± 1 dB
Gain Control Range0 ~ 20 dB Adj.0 ~ 20 dB Adj.
Slope Range0 ~ 10 dB Adj. or wider1 ~ 3 dB Fixed, or 0 ~10 dB Adj. or wider
Noise Figure≤ 8 dB≤ 8 dB
Return Loss (75-ohm Reference)≥ 10 dB
Recommended Output Levels≥ 32 / 42 dBmV (82 / 870 MHz)≥ 32 / 32 dBmV ( 5 / 65 MHz)
Rated Signal Level Distortion (*)
Cross Modulation (XMOD)≤ - 58 dB≤ - 58 dB
Composite Second Order (CSO)≤ - 60 dB≤ - 60 dB
Composite Triple Beat (CTB)≤ - 60 dB≤ - 60 dB
Input / Output Impedances75 ohms
Hum Modulation≥ 60 dB
Power Requirements200 ~ 240 VAC / 50 Hz, or wider
Housing DesignAluminum housing with good RFI shielding & heat spread

NOTE:

-Measured with 110 NTSC (or 80 PAL) channels of Forward Path, at least 2 T-channels of Return Path, at Recommended Output Levels.

- Return Attenuator and EQ must be designed / placed at OUTPUT of Return Amp. Module.

Related products

Categories →

Tell us what you need

Send a request to get help choosing equipment and a connection plan.

Contact us