Technical support0919 235 568
Hoàng Phúc Corp
Seehai

870MHz 2-Way Amplifier (Big Housing and Three Amplification Modules)

  • Forward path 1 * 870 MHz GaAs or GaN Push-Pull Hybrid Amp and 2 * 870 MHz GaAs or GaN Power-Doubler Hybrid Amp Modules. Return path 1* Reverse Hybrid Amp. Module. Module has brand name from G7/EU countries All modules have brand name from G7/EU countries
  • High quality aluminum-alloy die-cast housing with passivation surface, beautiful and firm, corrosion prevention.
  • Waterproof design, lightning proof structure and rainproof connection, fit for outdoor use.
  • 20dB independent input and output test ports are set inside (outside optional) the product for the forward and return path.
  • Modularized plug-in diplex filter, equalizer and attenuator, easy to choose or upgrade according to user’s requirement.
  • Independent installation design for the power supply, 60 VAC (220VAC optional).
  • Apply to trunk and branch line in two way CATV system, to compensate the attenuation of branch lines.
Product code
MODEL: SFD-8738S2K6C3

Overview

Block Diagram:

870MHz 2 Way Amplifier Big Housing and Three Amplification Modules

Technical data

The specifications below are taken from the product catalog.

Specification:

ITEMSFORWARD PATHRETURN PATH
Frequency Range82 ~ 870 MHz, or higher5 ~ 65 MHz
Operating Gain (Includes DPXs, EQs, AGC, …, and Direct Output Module)≥ 38 dB, full range≥ 20 dB, full range
Response Flatness≤ ± 0.75 dB
Gain Control Range0 ~ 20 dB Adj. / plug-in PAD0 ~ 20 dB Adj. / plug-in PAD
Slope Control Range (Fixed value, Plug-in modules)3 ~ 12dB3 ~ 9dB
Noise Figure≤ 9 dB≤ 9 dB
Return Loss (75-ohm Reference)≥ 12 dB, full range
Recommended Output Levels (Direct Output)≥ 38 / 50 dBmV (82 / 870 MHz)≥ 42 / 42 dBmV (5 / 65 MHz)
Rated Signal Level Distortion (*)
Cross Modulation (XMOD)≤ - 60 dB≤ - 60 dB
Composite Second Order (CSO)≤ - 63 dB≤ - 63 dB
Composite Triple Beat (CTB)≤ - 63 dB≤ - 63 dB
Input / Output Impedances75 ohms, 5/8-24 Female
Hum Modulation≥ 65 dB @ 10A passing current
Power Requirements40 ~ 90 VAC / 50 ~ 60 Hz
Internal Circuit Voltage24 ± 0.3 VDC (high efficient switchmode power supply), withstand ≥1.5A Load. Overload, overvoltage, short circuit protection.
Housing DesignDie-cast aluminium housing design with paint/coating for: - Good heat spread (Operating Temp.: 0 ~ +60oC, or wider). - RF shielding ≥ 110 dB. - IP67 degree of dust and water protection. - For strand and pedestal mounting.

NOTE:

-Measured with 132 NTSC (or 96 PAL) channels of Forward Path, at least 4 T-channels of Return Path, at Recommended Output Levels.

- Support Adj. Attenuator / plug-in Attenuator (PAD), plug-in DPX, and plug-in EQ between hybrid modules.

- Support Forward IN and OUT Test Ports (-20 dB), Return IN and OUT Test ports (-20 dB).

- Support one or two outputs by plug-in jumper or splitter.

- Return Attenuator and EQ are designed / located at OUTPUT of Return Amp. Module.

- Lightning Arrestors at all IN/OUT Ports.

Related products

Categories →

Tell us what you need

Send a request to get help choosing equipment and a connection plan.

Contact us