Technical support0919 235 568
Hoàng Phúc Corp
Seehai

FTTH Optical Receiver with WDM (FTTH-SOR01AP-WDM)

  • Optical receiving range: -18dBm~+2dBm;
  • AGC control to keep constant output level in different optical input power
  • RF output level: ≥80 dBμV @-10dBm optical input power;
  • The plastic housing with durable structure and good appearance, it is suitable for household and adopts special heat dissipation design. The detector uses metal shielding cover, it is safe and reliable.
  • LED indicator for showing the status of power supply and optical signal.
Product code
FTTH-SOR01AP-WDM

Overview

This product is FTTH (Fiber to the Home) optical receiver, with low power optical receiving and optical control AGC technique, which can satisfy the demand of FTTH, and also can match with ONU or EOC for realizing the integration of three networks. With WDM, 1550nm CATV to be photoelectric converted for RF output, 1490/1310 nm PON signals directly pass, can transfer CATV+EPON by only one pc optical fiber.

The product is with compact structure, it is easy to install, and this is an ideal product for FTTH CATV network

Technical data

The specifications below are taken from the product catalog.

Specification

ItemUnitSpecification
Receiver TypePhotodiode with brand name from G7/EU countries
Amplifier TypeMMIC with brand name from G7/EU countries
CATV Wavelengthnm1550±10
PON Wavelengthnm1310/1490
Optical Input PowerdBm-18~+2
Optical AGC RangedBm-11~+2
CATV Optical input portSC/APC
PON Optical reflect portSC/APC
RF connectorF-Female
FrequencyMHz47~1000
FlatnessdB≤±1.25
RF Output Level (in AGC range)dBμV≥80
Output RF resistanceΩ75
Output Return LossdB≤-12
C/NdB≥43-9dBm Optical input power, 60 PAL channels
C/CSOdB≥55
C/CTBdB≥55
MERdB≥31-15dBm optical input power
Power Supply VoltageAC\V100~240 (Input of adaptor)
Input VoltageDC\V+5V/12V(Input of product, output of adaptor)
Power DissipationW≤2
Operating Temperature℃-10~+50
Dimensionmm95×60×23 (L×W×H)

Block Diagram

Interface introduction

FTTH-SOR01AP-WDM-04

1. LED indicator for power supply. If power supply works normally, the LED indicator will be green; if fails or power off, the indicator will be off.

2. LED indicator for optical receiving power. When optical receiving power is higher than -12dBm, the LED indicator will be green. When optical receiving power is lower than -12dBm, the LED indicator will be red.

3. CATV optical input port: SC/APC.

4. RF output port. Use coaxial cable to connect with the RF input port of TV or STB.

5. Power input port. Connect with the attached power adaptor.

6. PON optical output port: SC/APC.

Related products

Categories →

Tell us what you need

Send a request to get help choosing equipment and a connection plan.

Contact us